Welcome How is the explosion-proof fan set up?

　　7) The grouting process is important for the full explosion-proof fan installment process. It not alone acts on space between the base and also the foundation concrete, but also has a great influence about the transmission of the explosion-proof fan load as well as assistance of the mechanical rigidity. Thus, during construction, special attention need to be paid to your shrinkage and fracture in the mud, and reasonable construction methods need to be adopted.

　　8) In general large explosion-proof fan, the casing along with the base are divided. For a split-type explosion-proof admirer, the casing is definitely divided into a handful of parts. When setting up, first install the explosion-proof following and bearing base reported by the above process, and then change the stator and rotor in line with the order on the lower casing, rotor as well as upper casing.

　　When installing an important explosion-proof fan, because of its high amount of requirements, it Wholesale Booster Pipe Fans Factory should be adjusted simply by using a pair of diagonal horns.

　　In advance of assembly, first check whether you will find problems such since burrs, curling, along with deformation on each joint surface. Whenever assembling, care must be taken to keep your grinding surface clean in order to prevent scratching your joint surface. As soon as assembling the casing, the casing is not touched on the rotor no load is combined with the rotor.

　　9) Now and again, because it is impossible recreate enough foundation, the explosion-proof fan is frequently installed on the damper to scale back the transmission force on the vibration. The damper must be arranged centering on the biggest market of gravity of the explosion-proof fan to confirm the dampers. The number of compression is similar.

　　Although this style of installation can cut down the propagation of vibration for the foundation, the vibration in the explosion-proof fan itself will increase, so the canvas as well as rubber flexible joint has to be used when linking the inlet and outlet of the explosion-proof fan.

　　10) Inside the building, explosion-proof fans will be sometimes installed as a scorpio suspension. In addition to the extremely small explosion-proof fan might be installed by holding bolt frame, the welding frame should be used if you can ,.

[ بازدید : 73 ] [ امتیاز : 0 ] [ نظر شما : ]